| Last Modified: 11-29-2007 | 1.6 G | |
| Service Category: Vehicle Interior | Section: Lighting (int) | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000003G9J000X |
| Title: LIGHTING (INT): ROOM LIGHT (for Rear): INSPECTION (2008 Sequoia) | ||
INSPECTION
1. INSPECT NO. 1 ROOM LIGHT ASSEMBLY
|
(a) Connect the (+) lead from the battery to terminal 1 and the (-) lead to terminal 2 or 3. |
(b) Check that the room light comes on.
OK:
|
Measurement Condition |
Switch Condition |
Specified Condition |
|---|---|---|
|
Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 2 |
ON |
Room light comes on |
|
OFF |
Room light turns off |
|
|
Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 3 |
ON |
Room light comes on |
|
OFF |
Room light turns off |
If the result is not as specified, replace the No. 1 room light assembly.
|
|